A Concurrent Dual-band CMOS Partial Feedback LNA with Noise and Input Impedance Matching Optimization for Advanced WLAN Applications

A concurrent dual-band CMOS partial feedback LNA optimizing noise and input reflection coefficient (S₁₁) at both 2.4 and 5.2 GHz frequency bands is designed using a 65-nm CMOS process for advanced WLAN applications. The inverter-based input transconductance stage directly drives two parallel cascode transistors with 2.4 and 5.2 GHz LC loads, and the output signals splitting into two resonators are combined through a complementary source follower (CSF). Based on an analytical study on the optimum noise impedance (Z_opt) and minimum noise figure (NF_min) of the proposed concurrent LNA circuit topology, the concurrent dual-band input matching network is designed in order to achieve low noise figure (NF) around NF_min at both operating frequencies. By employing a partial resistive feedback between 2.4 GHz LC resonator and input transconductance stage through a CSF, an imperfect S₁₁ of the proposed LNA at 2.4 GHz is improved at the expense of a slight increase of NF. In the simulation, the designed LNA achieved forward gain (S₂₁) of 14 and 15.5 dB, NF of 1.6 and 2.2 dB, and S₁₁ of-11.2 and-10.3 dB at 2.4 and 5.2 GHz, respectively. The power consumption of the designed LNA is 7.7 mW from a 1.2 V supply voltage.