A design of dual band amplifier using left handed transmission lines

  • Jongsik Lim*
  • , Jaehoon Lee-
  • , Jun Lee
  • , Jakyung Koo
  • , Yongchae Jeong
  • , Sang Min Han
  • , Dal Ahn
  • *Corresponding author for this work

Research output: Contribution to journalJournal articlepeer-review

Abstract

This paper describes a design of dual band amplifier using left handed (LHJ) transmission line, which is a part of composite right/left handed (CRLH) transmission line. It is well known that CRLH transmission lines show dual band frequency response. At first, two single-band amplifiers for frequency f1 and f2 are designed, and their matching networks at both amplifiers are synthesized into the dual band matching network by adopting CRLH structure. As an example for proving the validity of the proposed design, a dual band amplifier operating at 1800MHz and 2300MHz is designed, fabricated and measured. The simulation and measurement show that the proposed amplifier operates well at the desired dual bands with the gain of 13.65dB and 19dB at 1850MHz and 2360MHz, respectively, and a good matching performances. In addition, a quite good agreement between the simulation and measurement is observed.

Original languageEnglish
Pages (from-to)2032-2037
Number of pages6
JournalTransactions of the Korean Institute of Electrical Engineers
Volume59
Issue number11
StatePublished - 2010.11

Keywords

  • CRLH
  • Dual band amplifier
  • LH

Fingerprint

Dive into the research topics of 'A design of dual band amplifier using left handed transmission lines'. Together they form a unique fingerprint.

Cite this