Skip to main navigation Skip to search Skip to main content

A simple hardware structure for SNR estimation

  • Jeonbuk National University
  • Electronics and Telecommunications Research Institute

Research output: Contribution to conferenceConference paperpeer-review

Abstract

In this paper, we present an efficient hardware structure to estimate signal to noise ratio (SNR) for M-ary amplitude and phase modulation schemes at the receiver. The proposed hardware structure requires a counter and two comparators with a predetermined look up table (LUT). For an estimation error of less than 1 dB, it needs just about a few hundred samples. We can design the LUTs with theoretically derived values and tailor them for special purposes. We demonstrate a few simulation results of the estimation algorithm, and present hardware implementation results.

Original languageEnglish
Title of host publicationMilitary Communications Conference, MILCOM 2007
DOIs
StatePublished - 2007
EventMilitary Communications Conference, MILCOM 2007 - Orlando, FL, United States
Duration: 2007.10.292007.10.31

Publication series

NameProceedings - IEEE Military Communications Conference MILCOM

Conference

ConferenceMilitary Communications Conference, MILCOM 2007
Country/TerritoryUnited States
CityOrlando, FL
Period07.10.2907.10.31

Quacquarelli Symonds(QS) Subject Topics

  • Engineering - Electrical & Electronic
  • Engineering - Petroleum

Fingerprint

Dive into the research topics of 'A simple hardware structure for SNR estimation'. Together they form a unique fingerprint.

Cite this