A single gap transflective fringe-field switching display

E. Jeong; M. O. Choi; Y. J. Lim; Y. H. Jeong; H. Y. Kim; S. Y. Kim; S. H. Lee

doi:10.1889/1.2433638

A single gap transflective fringe-field switching display

E. Jeong^*
, M. O. Choi
, Y. J. Lim
, Y. H. Jeong
, H. Y. Kim
, S. Y. Kim
, S. H. Lee

^*Corresponding author for this work

Department of Polymer -Nano Science &Technology

Research output: Contribution to journal › Conference article › peer-review

2 Scopus citations

Abstract

A conventional single gap transflective fringe-field switching display has a difficulty in fabricating a reflector with embossing. To solve this problem, we propose a new structure which has the reflector on the color filter side, without deteriorating reflectance and transmittance. And this single gap transflective LCDs has a problem such that the voltage-dependent transmittance and reflectance curves do not match each other and thus a dual driving circuit is required. New FFS electrode structure which optimized an angle of the electrode in the transmissive and reflective area solves this problem so that the transflective display with a single gamma curve and for reflective and transmissive region is possible.

Original language	English
Pages (from-to)	810-812
Number of pages	3
Journal	Digest of Technical Papers - SID International Symposium
Volume	37
Issue number	2
DOIs	https://doi.org/10.1889/1.2433638
State	Published - 2006
Event	44th International Symposium, Seminar, and Exhibition, SID 2006 - San Francisco, CA, United States Duration: 2006.06.4 → 2006.06.9

Quacquarelli Symonds(QS) Subject Topics

Engineering & Technology

Access to Document

10.1889/1.2433638

Cite this

@article{d829b09cfe8c4b31bb41052da6a25e66,

title = "A single gap transflective fringe-field switching display",

abstract = "A conventional single gap transflective fringe-field switching display has a difficulty in fabricating a reflector with embossing. To solve this problem, we propose a new structure which has the reflector on the color filter side, without deteriorating reflectance and transmittance. And this single gap transflective LCDs has a problem such that the voltage-dependent transmittance and reflectance curves do not match each other and thus a dual driving circuit is required. New FFS electrode structure which optimized an angle of the electrode in the transmissive and reflective area solves this problem so that the transflective display with a single gamma curve and for reflective and transmissive region is possible.",

author = "E. Jeong and Choi, \{M. O.\} and Lim, \{Y. J.\} and Jeong, \{Y. H.\} and Kim, \{H. Y.\} and Kim, \{S. Y.\} and Lee, \{S. H.\}",

year = "2006",

doi = "10.1889/1.2433638",

language = "English",

volume = "37",

pages = "810--812",

journal = "Digest of Technical Papers - SID International Symposium",

issn = "0097-966X",

number = "2",

note = "44th International Symposium, Seminar, and Exhibition, SID 2006 ; Conference date: 04-06-2006 Through 09-06-2006",

}

TY - JOUR

T1 - A single gap transflective fringe-field switching display

AU - Jeong, E.

AU - Choi, M. O.

AU - Lim, Y. J.

AU - Jeong, Y. H.

AU - Kim, H. Y.

AU - Kim, S. Y.

AU - Lee, S. H.

PY - 2006

Y1 - 2006

N2 - A conventional single gap transflective fringe-field switching display has a difficulty in fabricating a reflector with embossing. To solve this problem, we propose a new structure which has the reflector on the color filter side, without deteriorating reflectance and transmittance. And this single gap transflective LCDs has a problem such that the voltage-dependent transmittance and reflectance curves do not match each other and thus a dual driving circuit is required. New FFS electrode structure which optimized an angle of the electrode in the transmissive and reflective area solves this problem so that the transflective display with a single gamma curve and for reflective and transmissive region is possible.

AB - A conventional single gap transflective fringe-field switching display has a difficulty in fabricating a reflector with embossing. To solve this problem, we propose a new structure which has the reflector on the color filter side, without deteriorating reflectance and transmittance. And this single gap transflective LCDs has a problem such that the voltage-dependent transmittance and reflectance curves do not match each other and thus a dual driving circuit is required. New FFS electrode structure which optimized an angle of the electrode in the transmissive and reflective area solves this problem so that the transflective display with a single gamma curve and for reflective and transmissive region is possible.

UR - https://www.scopus.com/pages/publications/33847699905

U2 - 10.1889/1.2433638

DO - 10.1889/1.2433638

M3 - Conference article

AN - SCOPUS:33847699905

SN - 0097-966X

VL - 37

SP - 810

EP - 812

JO - Digest of Technical Papers - SID International Symposium

JF - Digest of Technical Papers - SID International Symposium

IS - 2

T2 - 44th International Symposium, Seminar, and Exhibition, SID 2006

Y2 - 4 June 2006 through 9 June 2006

ER -

A single gap transflective fringe-field switching display

Abstract

Quacquarelli Symonds(QS) Subject Topics

Access to Document

Other files and links

Fingerprint

Cite this