Analysis of the Properties of Modified Asphalt Binder by FTIR Method

The usage of modified asphalt binder in road pavements has been increasing in the past few decades. Therefore, quality control and understanding of modified asphalt binders have become an important issue. This study was conducted as a part of a larger study on the efficient management of these modified asphalt binders by evaluating the characteristics of asphalt binders mixed with styrene–butadiene–styrene (SBS), ethylene-vinyl acetate (EVA), and wax-based warm-mix additives using Fourier transform infrared (FTIR) analysis. For original asphalt binders modified with SBS, response wavenumbers were 700 and 966 (Formula presented.), which means a particular wavenumber of polybutadiene and polystyrene, while in the case of binders modified with EVA, peak response wavenumbers were at 1242 and 1739 (Formula presented.) which represents a particular wavenumbers of a single stretching bond between carbon and hydrate and a double stretching bond between carbon and oxygen. Asphalt binders modified with wax-type additives showed peak response at 730 and 1540 (Formula presented.) which represents a double stretching bond of carbon and a single stretching bond between nitrogen and oxygen. It was also found that peak values increased as addition rates also increased. The results showed that the additives used in this study have particular wavenumbers that show peak responses even when mixed into asphalt binders. Using these characteristics of the additives, FTIR analysis confirms that it is possible to determine whether or not a binder has been modified.