Design of FlexRay-MOST gateway using static segments and control messages

Ze Hua Dong; Zhe Yan Piao; In Gul Jang; Jin Gyun Chung; Chul Dong Lee

doi:10.1109/ISCAS.2012.6272085

Design of FlexRay-MOST gateway using static segments and control messages

Ze Hua Dong^*
, Zhe Yan Piao
, In Gul Jang
, Jin Gyun Chung
, Chul Dong Lee

^*Corresponding author for this work

Division of Electronic Engineering

Jeonbuk National University
Korea Electronics Technology Institute

Research output: Contribution to conference › Paper › peer-review

5 Scopus citations

Abstract

Due to the increasing requirements on the high speed communication and infotainment applications for automobiles, much research has been carried out for high speed automobile network technology called Media Oriented System Transport (MOST). Since many electronic control units (ECUs) are connected to the traditional automotive networks such as CAN, LIN and FlexRay, a network gateway is needed to bridge between MOST and other traditional networks. In this paper, we present a FlexRay-MOST gateway architecture. The proposed gateway system is designed with Verilog HDL and implemented using SoC kits.

Original language	English
Pages	536-539
Number of pages	4
DOIs	https://doi.org/10.1109/ISCAS.2012.6272085
State	Published - 2012
Event	2012 IEEE International Symposium on Circuits and Systems, ISCAS 2012 - Seoul, Korea, Republic of Duration: 2012.05.20 → 2012.05.23

Conference

Conference	2012 IEEE International Symposium on Circuits and Systems, ISCAS 2012
Country/Territory	Korea, Republic of
City	Seoul
Period	12.05.20 → 12.05.23

Quacquarelli Symonds(QS) Subject Topics

Computer Science & Information Systems
Engineering - Electrical & Electronic
Engineering - Petroleum

Access to Document

10.1109/ISCAS.2012.6272085

Cite this

@conference{b7fa28c51fff42e1a2d4fd2a5b3a5c45,

title = "Design of FlexRay-MOST gateway using static segments and control messages",

abstract = "Due to the increasing requirements on the high speed communication and infotainment applications for automobiles, much research has been carried out for high speed automobile network technology called Media Oriented System Transport (MOST). Since many electronic control units (ECUs) are connected to the traditional automotive networks such as CAN, LIN and FlexRay, a network gateway is needed to bridge between MOST and other traditional networks. In this paper, we present a FlexRay-MOST gateway architecture. The proposed gateway system is designed with Verilog HDL and implemented using SoC kits.",

author = "Dong, \{Ze Hua\} and Piao, \{Zhe Yan\} and Jang, \{In Gul\} and Chung, \{Jin Gyun\} and Lee, \{Chul Dong\}",

year = "2012",

doi = "10.1109/ISCAS.2012.6272085",

language = "English",

pages = "536--539",

note = "2012 IEEE International Symposium on Circuits and Systems, ISCAS 2012 ; Conference date: 20-05-2012 Through 23-05-2012",

}

TY - CONF

T1 - Design of FlexRay-MOST gateway using static segments and control messages

AU - Dong, Ze Hua

AU - Piao, Zhe Yan

AU - Jang, In Gul

AU - Chung, Jin Gyun

AU - Lee, Chul Dong

PY - 2012

Y1 - 2012

N2 - Due to the increasing requirements on the high speed communication and infotainment applications for automobiles, much research has been carried out for high speed automobile network technology called Media Oriented System Transport (MOST). Since many electronic control units (ECUs) are connected to the traditional automotive networks such as CAN, LIN and FlexRay, a network gateway is needed to bridge between MOST and other traditional networks. In this paper, we present a FlexRay-MOST gateway architecture. The proposed gateway system is designed with Verilog HDL and implemented using SoC kits.

AB - Due to the increasing requirements on the high speed communication and infotainment applications for automobiles, much research has been carried out for high speed automobile network technology called Media Oriented System Transport (MOST). Since many electronic control units (ECUs) are connected to the traditional automotive networks such as CAN, LIN and FlexRay, a network gateway is needed to bridge between MOST and other traditional networks. In this paper, we present a FlexRay-MOST gateway architecture. The proposed gateway system is designed with Verilog HDL and implemented using SoC kits.

UR - https://www.scopus.com/pages/publications/84866621735

U2 - 10.1109/ISCAS.2012.6272085

DO - 10.1109/ISCAS.2012.6272085

M3 - Paper

AN - SCOPUS:84866621735

SP - 536

EP - 539

T2 - 2012 IEEE International Symposium on Circuits and Systems, ISCAS 2012

Y2 - 20 May 2012 through 23 May 2012

ER -

Design of FlexRay-MOST gateway using static segments and control messages

Abstract

Conference

Quacquarelli Symonds(QS) Subject Topics

Access to Document

Other files and links

Fingerprint

Cite this