Skip to main navigation Skip to search Skip to main content

Dual-functional ultraviolet photodetector with graphene electrodes on AlGaN/GaN heterostructure

  • Bhishma Pandit
  • , E. Fred Schubert
  • , Jaehee Cho*
  • *Corresponding author for this work

Research output: Contribution to journalJournal articlepeer-review

Abstract

A dual-functional ultraviolet (UV) photodetector with a large UV-to-visible rejection ratio is presented, in which interdigitated finger-type two-dimensional graphene electrodes are introduced to an AlGaN/GaN heterostructure. Two photocurrent generation mechanisms of photovoltaic and photoconductive dominances coexist in the device. The dominance of the mechanisms changes with the induced bias voltage. Below a threshold voltage, the device showed fairly low responsivities but fast response times, as well as a constant photocurrent against the induced bias. However, the opposite characteristics appeared with high bias voltage. Specifically, above the threshold voltage, the device showed high responsivities with additional gain, but slow rise and recovery times. For instance, the responsivity of 10.9 A/W was observed with the gain of 760 at the induced bias voltage of 5 V. This unique multifunctionality enabled by the combination of an AlGaN/GaN heterostructure with graphene electrodes facilitates the development of a single device that can achieve multiple purposes of photodetection.

Original languageEnglish
Article number22059
JournalScientific Reports
Volume10
Issue number1
DOIs
StatePublished - 2020.12

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Fingerprint

Dive into the research topics of 'Dual-functional ultraviolet photodetector with graphene electrodes on AlGaN/GaN heterostructure'. Together they form a unique fingerprint.

Cite this