Effect of Fe2O3 addition on consolidation and properties of 8 mol% yttria-stabilized zirconia by high-frequency induction heated sintering (HFIHS)

In Jin Shon; In Kyoon Jeong; Jeong Hwan Park; Byung Ryang Kim; Ki Tae Lee

doi:10.1016/j.ceramint.2007.11.006

Effect of Fe₂O₃ addition on consolidation and properties of 8 mol% yttria-stabilized zirconia by high-frequency induction heated sintering (HFIHS)

In Jin Shon^*
, In Kyoon Jeong
, Jeong Hwan Park
, Byung Ryang Kim
, Ki Tae Lee

^*Corresponding author for this work

Electronic Materials Engineering

Jeonbuk National University

Research output: Contribution to journal › Journal article › peer-review

24 Scopus citations

Abstract

Dense nanophase 8 mol% yttria-stabilized zirconia was sintered by high-frequency induction heated sintering (HFIHS) within 6 min from 8YSZ nanopowder prepared by co-precipitation method. Sintering was accomplished under the combined effects of an induced current and mechanical pressure. Highly dense 8YSZ with relative density of up to 96% was produced under simultaneous application of a 60-MPa pressure and the induced current. The effects of Fe₂O₃ additions on the sintering behavior, mechanical properties and ionic conductivities of the 8YSZ were investigated.

Original language	English
Pages (from-to)	363-368
Number of pages	6
Journal	Ceramics International
Volume	35
Issue number	1
DOIs	https://doi.org/10.1016/j.ceramint.2007.11.006
State	Published - 2009.01

Keywords

8YSZ
C. Ionic conductivity
C. Mechanical properties
High-frequency induction heated sintering

Quacquarelli Symonds(QS) Subject Topics

Materials Science
Engineering - Petroleum
Engineering - Chemical

Access to Document

10.1016/j.ceramint.2007.11.006

Cite this

@article{b9c3952375fc487987fbd67b387d242a,

title = "Effect of Fe2O3 addition on consolidation and properties of 8 mol\% yttria-stabilized zirconia by high-frequency induction heated sintering (HFIHS)",

abstract = "Dense nanophase 8 mol\% yttria-stabilized zirconia was sintered by high-frequency induction heated sintering (HFIHS) within 6 min from 8YSZ nanopowder prepared by co-precipitation method. Sintering was accomplished under the combined effects of an induced current and mechanical pressure. Highly dense 8YSZ with relative density of up to 96\% was produced under simultaneous application of a 60-MPa pressure and the induced current. The effects of Fe2O3 additions on the sintering behavior, mechanical properties and ionic conductivities of the 8YSZ were investigated.",

keywords = "8YSZ, C. Ionic conductivity, C. Mechanical properties, High-frequency induction heated sintering",

author = "Shon, \{In Jin\} and Jeong, \{In Kyoon\} and Park, \{Jeong Hwan\} and Kim, \{Byung Ryang\} and Lee, \{Ki Tae\}",

year = "2009",

month = jan,

doi = "10.1016/j.ceramint.2007.11.006",

language = "English",

volume = "35",

pages = "363--368",

journal = "Ceramics International",

issn = "0272-8842",

number = "1",

}

TY - JOUR

T1 - Effect of Fe2O3 addition on consolidation and properties of 8 mol% yttria-stabilized zirconia by high-frequency induction heated sintering (HFIHS)

AU - Shon, In Jin

AU - Jeong, In Kyoon

AU - Park, Jeong Hwan

AU - Kim, Byung Ryang

AU - Lee, Ki Tae

PY - 2009/1

Y1 - 2009/1

N2 - Dense nanophase 8 mol% yttria-stabilized zirconia was sintered by high-frequency induction heated sintering (HFIHS) within 6 min from 8YSZ nanopowder prepared by co-precipitation method. Sintering was accomplished under the combined effects of an induced current and mechanical pressure. Highly dense 8YSZ with relative density of up to 96% was produced under simultaneous application of a 60-MPa pressure and the induced current. The effects of Fe2O3 additions on the sintering behavior, mechanical properties and ionic conductivities of the 8YSZ were investigated.

AB - Dense nanophase 8 mol% yttria-stabilized zirconia was sintered by high-frequency induction heated sintering (HFIHS) within 6 min from 8YSZ nanopowder prepared by co-precipitation method. Sintering was accomplished under the combined effects of an induced current and mechanical pressure. Highly dense 8YSZ with relative density of up to 96% was produced under simultaneous application of a 60-MPa pressure and the induced current. The effects of Fe2O3 additions on the sintering behavior, mechanical properties and ionic conductivities of the 8YSZ were investigated.

KW - 8YSZ

KW - C. Ionic conductivity

KW - C. Mechanical properties

KW - High-frequency induction heated sintering

UR - https://www.scopus.com/pages/publications/55949085171

U2 - 10.1016/j.ceramint.2007.11.006

DO - 10.1016/j.ceramint.2007.11.006

M3 - Journal article

AN - SCOPUS:55949085171

SN - 0272-8842

VL - 35

SP - 363

EP - 368

JO - Ceramics International

JF - Ceramics International

IS - 1

ER -