Effects of Biceramic AlN-SiC Microparticles on the Thermal Properties of Paraffin for Thermal Energy Storage

Arash Badakhsh; Kay Hyeok An; Chan Woo Park; Byung Joo Kim

doi:10.1155/2018/8632350

Effects of Biceramic AlN-SiC Microparticles on the Thermal Properties of Paraffin for Thermal Energy Storage

Arash Badakhsh
, Kay Hyeok An^*
, Chan Woo Park
, Byung Joo Kim

^*Corresponding author for this work

Mechanical Design Engineering

Korea Institute of Carbon Convergence Technology KCTECH
Jeonbuk National University
Jeonju University

Research output: Contribution to journal › Journal article › peer-review

13 Scopus citations

Abstract

Herein, simplified time-efficient production of AlN-coated SiC (SiC@AlN) ceramic powder was practiced. Short-term vibratory ball milling with high frequency was employed to integrate the microsize particles. Also, paraffin as a significant phase change material (PCM) was reinforced using the manufactured SiC@AlN in order to enhance the thermal conductivity (TC) and stability of the final composite. Various characterization methods were used to clarify the changes in particle size of the biceramic powder as well as the thermal features of the paraffin-based composite. Manufactured SiC@AlN was found to be the most effective in the improvement of interfacial adhesion of composite components and the subsequent enhancement of TC, compared with singular ceramic powders as the reinforcing agents. Also, differential scanning calorimetry (DSC) indicated a very slight increase in latent heat of the fabricated composite PCM.

Original language	English
Article number	8632350
Journal	Journal of Nanomaterials
Volume	2018
DOIs	https://doi.org/10.1155/2018/8632350
State	Published - 2018

Quacquarelli Symonds(QS) Subject Topics

Materials Science

Access to Document

10.1155/2018/8632350

Cite this

@article{331d98a5a79747419f0d696dfe80fc2a,

title = "Effects of Biceramic AlN-SiC Microparticles on the Thermal Properties of Paraffin for Thermal Energy Storage",

abstract = "Herein, simplified time-efficient production of AlN-coated SiC (SiC@AlN) ceramic powder was practiced. Short-term vibratory ball milling with high frequency was employed to integrate the microsize particles. Also, paraffin as a significant phase change material (PCM) was reinforced using the manufactured SiC@AlN in order to enhance the thermal conductivity (TC) and stability of the final composite. Various characterization methods were used to clarify the changes in particle size of the biceramic powder as well as the thermal features of the paraffin-based composite. Manufactured SiC@AlN was found to be the most effective in the improvement of interfacial adhesion of composite components and the subsequent enhancement of TC, compared with singular ceramic powders as the reinforcing agents. Also, differential scanning calorimetry (DSC) indicated a very slight increase in latent heat of the fabricated composite PCM.",

author = "Arash Badakhsh and An, \{Kay Hyeok\} and Park, \{Chan Woo\} and Kim, \{Byung Joo\}",

note = "Publisher Copyright: {\textcopyright} 2018 Arash Badakhsh et al.",

year = "2018",

doi = "10.1155/2018/8632350",

language = "English",

volume = "2018",

journal = "Journal of Nanomaterials",

issn = "1687-4110",

}

TY - JOUR

T1 - Effects of Biceramic AlN-SiC Microparticles on the Thermal Properties of Paraffin for Thermal Energy Storage

AU - Badakhsh, Arash

AU - An, Kay Hyeok

AU - Park, Chan Woo

AU - Kim, Byung Joo

PY - 2018

Y1 - 2018

N2 - Herein, simplified time-efficient production of AlN-coated SiC (SiC@AlN) ceramic powder was practiced. Short-term vibratory ball milling with high frequency was employed to integrate the microsize particles. Also, paraffin as a significant phase change material (PCM) was reinforced using the manufactured SiC@AlN in order to enhance the thermal conductivity (TC) and stability of the final composite. Various characterization methods were used to clarify the changes in particle size of the biceramic powder as well as the thermal features of the paraffin-based composite. Manufactured SiC@AlN was found to be the most effective in the improvement of interfacial adhesion of composite components and the subsequent enhancement of TC, compared with singular ceramic powders as the reinforcing agents. Also, differential scanning calorimetry (DSC) indicated a very slight increase in latent heat of the fabricated composite PCM.

AB - Herein, simplified time-efficient production of AlN-coated SiC (SiC@AlN) ceramic powder was practiced. Short-term vibratory ball milling with high frequency was employed to integrate the microsize particles. Also, paraffin as a significant phase change material (PCM) was reinforced using the manufactured SiC@AlN in order to enhance the thermal conductivity (TC) and stability of the final composite. Various characterization methods were used to clarify the changes in particle size of the biceramic powder as well as the thermal features of the paraffin-based composite. Manufactured SiC@AlN was found to be the most effective in the improvement of interfacial adhesion of composite components and the subsequent enhancement of TC, compared with singular ceramic powders as the reinforcing agents. Also, differential scanning calorimetry (DSC) indicated a very slight increase in latent heat of the fabricated composite PCM.

UR - https://www.scopus.com/pages/publications/85059157632

U2 - 10.1155/2018/8632350

DO - 10.1155/2018/8632350

M3 - Journal article

AN - SCOPUS:85059157632

SN - 1687-4110

VL - 2018

JO - Journal of Nanomaterials

JF - Journal of Nanomaterials

M1 - 8632350

ER -

Effects of Biceramic AlN-SiC Microparticles on the Thermal Properties of Paraffin for Thermal Energy Storage

Abstract

Quacquarelli Symonds(QS) Subject Topics

Access to Document

Other files and links

Fingerprint

Cite this