Skip to main navigation Skip to search Skip to main content

Gasification characteristics of combustible wastes in a 5 ton/day fixed bed gasifier

  • See Hoon Lee*
  • , Kyong Bin Choi
  • , Jae Goo Lee
  • , Jae Ho Kim
  • *Corresponding author for this work
  • Korea Institute of Energy Research

Research output: Contribution to journalJournal articlepeer-review

Abstract

The gasification characteristics of combustible wastes were determined in a 5 ton/day fixed bed gasifier (1.2 m I.D. and 2.8 m high). The fixed bed gasifier consisted of air compressor, oxygen tank, MFC, fixed bed gasifier, cyclone, heat exchanger, solid/gas separator, water fluidized bed reactor and blower. To capture soot or unburned carbon from the gasification reaction, solid/gas separator and water fluidized bed were used. The experiments with 10-50 hours of operation were carried out to determine the effects of bed temperature, solid/oxygen ratio and oxidant on the gas composition, calorific value and carbon conversion. The calorific values of the produced gas decreased with an increase of bed temperature because combustion reaction happened more actively. The gas composition of partial oxidation of woodchip is CO: 34.4%, H2: 10.7%, CH4: 6.0%, CO2: 48.9% and that of RPF is CO: 33.9%, H2: 26.1%, CH4: 10.7%, CO2: 29.2%. The average calorific values of produced gas were about 1,933 kcal/Nm3, 2,863 kcal/Nm3, respectively. The maximum calorific values were 3,100 kcal/Nm3 at RPF/oxygen ratio: 7.

Original languageEnglish
Pages (from-to)576-580
Number of pages5
JournalKorean Journal of Chemical Engineering
Volume23
Issue number4
DOIs
StatePublished - 2006.07

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 13 - Climate Action
    SDG 13 Climate Action

Keywords

  • Combustible waste
  • Fixed bed
  • Gasification
  • Syngas

Fingerprint

Dive into the research topics of 'Gasification characteristics of combustible wastes in a 5 ton/day fixed bed gasifier'. Together they form a unique fingerprint.

Cite this