Heteropolyacid blended polyethylene oxide based solid electrolyte for the fabrication of solid state dye sensitized solar cell

M. Shaheer Akhtar; Chun Ji Min; Cheol Lee Hyun; Ki Ju Kim; O. Bong Yang

Heteropolyacid blended polyethylene oxide based solid electrolyte for the fabrication of solid state dye sensitized solar cell

M. Shaheer Akhtar
, Chun Ji Min
, Cheol Lee Hyun
, Ki Ju Kim
, O. Bong Yang^*

^*Corresponding author for this work

Jeonbuk National University

Research output: Contribution to conference › Conference paper › peer-review

Abstract

A new HP As-polymer composite material with iodine/iodide was designed as a polymeric electrolyte for the fabrication of solid state dye sensitized solar cell. In this work, we made an effort to HPAs blended with polyethylene oxide (PEO) using a common (Acetonitrile) or mixed solvent (chloroform: methanol) for complete miscibility and finally with iodide/iodine used as a solid electrolyte. With this pioneering composite (HPAs/PEO), we have used successfully HPAs-PEO based gel electrolyte for the fabrication the DSSCs. A typical photocurrent-voltage (I-V) curves of fabricated DSSCs are shown an open circuit voltage of 0.520 volt and a short circuit current of 9.2 mA/cm² with 3% overall conversion efficiency of these quasi solid state cells at 100mW/cm². This is the first reported attempt to use HPA blended PEO with iodine/iodide based solid electrolytes and achieved comparably good conversion efficiency with earlier solid state DSSCs.

Original language	English
Title of host publication	25th International Power Sources Symposium and Exhibition 2007, IPSS 2007
Pages	91-100
Number of pages	10
State	Published - 2007
Event	25th International Power Sources Symposium and Exhibition 2007, IPSS 2007 - Bath, United Kingdom Duration: 2007.04.23 → 2007.04.25

Publication series

Name	25th International Power Sources Symposium and Exhibition 2007, IPSS 2007

Conference

Conference	25th International Power Sources Symposium and Exhibition 2007, IPSS 2007
Country/Territory	United Kingdom
City	Bath
Period	07.04.23 → 07.04.25

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Quacquarelli Symonds(QS) Subject Topics

Engineering - Electrical & Electronic
Engineering - Petroleum

Cite this

@inproceedings{b88bfeee559342199981db5eeae5f380,

title = "Heteropolyacid blended polyethylene oxide based solid electrolyte for the fabrication of solid state dye sensitized solar cell",

abstract = "A new HP As-polymer composite material with iodine/iodide was designed as a polymeric electrolyte for the fabrication of solid state dye sensitized solar cell. In this work, we made an effort to HPAs blended with polyethylene oxide (PEO) using a common (Acetonitrile) or mixed solvent (chloroform: methanol) for complete miscibility and finally with iodide/iodine used as a solid electrolyte. With this pioneering composite (HPAs/PEO), we have used successfully HPAs-PEO based gel electrolyte for the fabrication the DSSCs. A typical photocurrent-voltage (I-V) curves of fabricated DSSCs are shown an open circuit voltage of 0.520 volt and a short circuit current of 9.2 mA/cm2 with 3\% overall conversion efficiency of these quasi solid state cells at 100mW/cm2. This is the first reported attempt to use HPA blended PEO with iodine/iodide based solid electrolytes and achieved comparably good conversion efficiency with earlier solid state DSSCs.",

author = "Akhtar, \{M. Shaheer\} and Min, \{Chun Ji\} and Hyun, \{Cheol Lee\} and Kim, \{Ki Ju\} and Yang, \{O. Bong\}",

year = "2007",

language = "English",

isbn = "9781605601090",

series = "25th International Power Sources Symposium and Exhibition 2007, IPSS 2007",

pages = "91--100",

booktitle = "25th International Power Sources Symposium and Exhibition 2007, IPSS 2007",

note = "25th International Power Sources Symposium and Exhibition 2007, IPSS 2007 ; Conference date: 23-04-2007 Through 25-04-2007",

}

Akhtar, MS, Min, CJ, Hyun, CL, Kim, KJ & Yang, OB 2007, Heteropolyacid blended polyethylene oxide based solid electrolyte for the fabrication of solid state dye sensitized solar cell. in 25th International Power Sources Symposium and Exhibition 2007, IPSS 2007. 25th International Power Sources Symposium and Exhibition 2007, IPSS 2007, pp. 91-100, 25th International Power Sources Symposium and Exhibition 2007, IPSS 2007, Bath, United Kingdom, 07.04.23.

Heteropolyacid blended polyethylene oxide based solid electrolyte for the fabrication of solid state dye sensitized solar cell. / Akhtar, M. Shaheer; Min, Chun Ji; Hyun, Cheol Lee et al.
25th International Power Sources Symposium and Exhibition 2007, IPSS 2007. 2007. p. 91-100 (25th International Power Sources Symposium and Exhibition 2007, IPSS 2007).

Research output: Contribution to conference › Conference paper › peer-review

TY - GEN

T1 - Heteropolyacid blended polyethylene oxide based solid electrolyte for the fabrication of solid state dye sensitized solar cell

AU - Akhtar, M. Shaheer

AU - Min, Chun Ji

AU - Hyun, Cheol Lee

AU - Kim, Ki Ju

AU - Yang, O. Bong

PY - 2007

Y1 - 2007

N2 - A new HP As-polymer composite material with iodine/iodide was designed as a polymeric electrolyte for the fabrication of solid state dye sensitized solar cell. In this work, we made an effort to HPAs blended with polyethylene oxide (PEO) using a common (Acetonitrile) or mixed solvent (chloroform: methanol) for complete miscibility and finally with iodide/iodine used as a solid electrolyte. With this pioneering composite (HPAs/PEO), we have used successfully HPAs-PEO based gel electrolyte for the fabrication the DSSCs. A typical photocurrent-voltage (I-V) curves of fabricated DSSCs are shown an open circuit voltage of 0.520 volt and a short circuit current of 9.2 mA/cm2 with 3% overall conversion efficiency of these quasi solid state cells at 100mW/cm2. This is the first reported attempt to use HPA blended PEO with iodine/iodide based solid electrolytes and achieved comparably good conversion efficiency with earlier solid state DSSCs.

AB - A new HP As-polymer composite material with iodine/iodide was designed as a polymeric electrolyte for the fabrication of solid state dye sensitized solar cell. In this work, we made an effort to HPAs blended with polyethylene oxide (PEO) using a common (Acetonitrile) or mixed solvent (chloroform: methanol) for complete miscibility and finally with iodide/iodine used as a solid electrolyte. With this pioneering composite (HPAs/PEO), we have used successfully HPAs-PEO based gel electrolyte for the fabrication the DSSCs. A typical photocurrent-voltage (I-V) curves of fabricated DSSCs are shown an open circuit voltage of 0.520 volt and a short circuit current of 9.2 mA/cm2 with 3% overall conversion efficiency of these quasi solid state cells at 100mW/cm2. This is the first reported attempt to use HPA blended PEO with iodine/iodide based solid electrolytes and achieved comparably good conversion efficiency with earlier solid state DSSCs.

UR - https://www.scopus.com/pages/publications/84884377799

M3 - Conference paper

AN - SCOPUS:84884377799

SN - 9781605601090

T3 - 25th International Power Sources Symposium and Exhibition 2007, IPSS 2007

SP - 91

EP - 100

BT - 25th International Power Sources Symposium and Exhibition 2007, IPSS 2007

T2 - 25th International Power Sources Symposium and Exhibition 2007, IPSS 2007

Y2 - 23 April 2007 through 25 April 2007

ER -

Heteropolyacid blended polyethylene oxide based solid electrolyte for the fabrication of solid state dye sensitized solar cell

Abstract

Publication series

Conference

UN SDGs

Quacquarelli Symonds(QS) Subject Topics

Other files and links

Fingerprint

Cite this