Hysteresis data of planar perovskite solar cells fabricated with different solvents

You Hyun Seo; Eun Chong Kim; Se Phin Cho; Seok Soon Kim; Seok In Na

doi:10.1016/j.dib.2017.11.064

Hysteresis data of planar perovskite solar cells fabricated with different solvents

You Hyun Seo
, Eun Chong Kim
, Se Phin Cho
, Seok Soon Kim
, Seok In Na^*

^*Corresponding author for this work

Department of Flexible and Printable Electronics

Jeonbuk National University
Kunsan National University

Research output: Contribution to journal › Journal article › peer-review

10 Scopus citations

Abstract

In this data article, we introduced the hysteresis of planar perovskite solar cells (PSCs) fabricated using dimethylformamide (DMF), gamma-butyrolactone (GBL), methyl-2-pyrrolidinone (NMP), dimethylsulfoxide (DMSO), DMF-DMSO, GBL-DMSO and NMP-DMSO as perovskite precursor solutions according to different scan directions, sweep times, and current stability. The hysteresis analyses of the planar PSCs prepared with a glass-ITO /NiO_X/perovskite /PC₆₁BM/BCP/Ag configuration were measured with Keithley 2400 source meter unit under 100 mW/cm² (AM 1.5 G). The data collected in this article compares the hysteresis of PSCs with different solvents and is directly related to our research article “High-Performance Planar Perovskite Solar Cells: Influence of Solvent upon Performance” (You-Hyun Seo et al., 2017 [1]).

Original language	English
Pages (from-to)	418-422
Number of pages	5
Journal	Data in Brief
Volume	16
DOIs	https://doi.org/10.1016/j.dib.2017.11.064
State	Published - 2018.02

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Access to Document

10.1016/j.dib.2017.11.064

Cite this

@article{d1188fd7610047a8a0b2698a454f0db2,

title = "Hysteresis data of planar perovskite solar cells fabricated with different solvents",

abstract = "In this data article, we introduced the hysteresis of planar perovskite solar cells (PSCs) fabricated using dimethylformamide (DMF), gamma-butyrolactone (GBL), methyl-2-pyrrolidinone (NMP), dimethylsulfoxide (DMSO), DMF-DMSO, GBL-DMSO and NMP-DMSO as perovskite precursor solutions according to different scan directions, sweep times, and current stability. The hysteresis analyses of the planar PSCs prepared with a glass-ITO /NiOX/perovskite /PC61BM/BCP/Ag configuration were measured with Keithley 2400 source meter unit under 100 mW/cm2 (AM 1.5 G). The data collected in this article compares the hysteresis of PSCs with different solvents and is directly related to our research article “High-Performance Planar Perovskite Solar Cells: Influence of Solvent upon Performance” (You-Hyun Seo et al., 2017 [1]).",

author = "Seo, \{You Hyun\} and Kim, \{Eun Chong\} and Cho, \{Se Phin\} and Kim, \{Seok Soon\} and Na, \{Seok In\}",

note = "Publisher Copyright: {\textcopyright} 2017 The Authors",

year = "2018",

month = feb,

doi = "10.1016/j.dib.2017.11.064",

language = "English",

volume = "16",

pages = "418--422",

journal = "Data in Brief",

issn = "2352-3409",

}

TY - JOUR

T1 - Hysteresis data of planar perovskite solar cells fabricated with different solvents

AU - Seo, You Hyun

AU - Kim, Eun Chong

AU - Cho, Se Phin

AU - Kim, Seok Soon

AU - Na, Seok In

PY - 2018/2

Y1 - 2018/2

N2 - In this data article, we introduced the hysteresis of planar perovskite solar cells (PSCs) fabricated using dimethylformamide (DMF), gamma-butyrolactone (GBL), methyl-2-pyrrolidinone (NMP), dimethylsulfoxide (DMSO), DMF-DMSO, GBL-DMSO and NMP-DMSO as perovskite precursor solutions according to different scan directions, sweep times, and current stability. The hysteresis analyses of the planar PSCs prepared with a glass-ITO /NiOX/perovskite /PC61BM/BCP/Ag configuration were measured with Keithley 2400 source meter unit under 100 mW/cm2 (AM 1.5 G). The data collected in this article compares the hysteresis of PSCs with different solvents and is directly related to our research article “High-Performance Planar Perovskite Solar Cells: Influence of Solvent upon Performance” (You-Hyun Seo et al., 2017 [1]).

AB - In this data article, we introduced the hysteresis of planar perovskite solar cells (PSCs) fabricated using dimethylformamide (DMF), gamma-butyrolactone (GBL), methyl-2-pyrrolidinone (NMP), dimethylsulfoxide (DMSO), DMF-DMSO, GBL-DMSO and NMP-DMSO as perovskite precursor solutions according to different scan directions, sweep times, and current stability. The hysteresis analyses of the planar PSCs prepared with a glass-ITO /NiOX/perovskite /PC61BM/BCP/Ag configuration were measured with Keithley 2400 source meter unit under 100 mW/cm2 (AM 1.5 G). The data collected in this article compares the hysteresis of PSCs with different solvents and is directly related to our research article “High-Performance Planar Perovskite Solar Cells: Influence of Solvent upon Performance” (You-Hyun Seo et al., 2017 [1]).

UR - https://www.scopus.com/pages/publications/85036585174

U2 - 10.1016/j.dib.2017.11.064

DO - 10.1016/j.dib.2017.11.064

M3 - Journal article

AN - SCOPUS:85036585174

SN - 2352-3409

VL - 16

SP - 418

EP - 422

JO - Data in Brief

JF - Data in Brief

ER -

Hysteresis data of planar perovskite solar cells fabricated with different solvents

Abstract

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this