Skip to main navigation Skip to search Skip to main content

Influence of selenium doping on the properties of Cu2Sn(SxSe1−x)3 thin-film solar cells fabricated by sputtering

  • Jihun Kim
  • , Ju Yeon Lee
  • , Junsung Jang
  • , Mingrui He
  • , Woo Lim Jeong
  • , Mahesh P. Suryawanshi
  • , Jae Ho Yun
  • , Dong Seon Lee*
  • , Jin Hyeok Kim
  • *Corresponding author for this work
  • Gwangju Institute of Science and Technology
  • Chonnam National University
  • Korea Institute of Energy Research

Research output: Contribution to journal › Journal article › peer-review

Abstract

Cu2Sn(SxSe1−x)3 (CTSSe) (0 ≤ x ≤ 0.03) thin films are prepared using sputtered metal precursors. The influence of the quantity of selenium doped during an annealing process on the properties of CTSSe thin films and solar cells is investigated. The synthesized CTSSe thin films are grown in the monoclinic crystal structure with a densely packed morphology. The growth of the CTSSe thin films is successfully demonstrated by Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) analyses. The band gap energy of the CTSSe thin films are extrapolated from the optical spectra of the band edge region to be 0.86 eV and 0.88 eV. A compositional analysis using X-ray fluorescence (XRF) spectroscopy shows a consistent increase in the selenium content with increase in the quantity of added selenium. This dependence is confirmed by changes in the crystallinity, composition, optical and electrical properties. CTSSe thin-film solar cells (TFSCs) were fabricated with a structure of Mo/CTSSe/CdS/i-ZnO/AZO/Al. The best efficiency of 2.49% was achieved for the fabricated CTSSe TFSC with a Voc of 190.8 mV, Jsc of 34.6 mA/cm2, and FF of 37%.

Original languageEnglish
Pages (from-to)154-159
Number of pages6
JournalSolar Energy Materials and Solar Cells
Volume172
DOIs
StatePublished - 2017.12
Externally publishedYes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • CuSn(SSe)
  • Sputtering
  • Thin film solar cell

Fingerprint

Dive into the research topics of 'Influence of selenium doping on the properties of Cu2Sn(SxSe1−x)3 thin-film solar cells fabricated by sputtering'. Together they form a unique fingerprint.

Cite this