Abstract
There is a growing trend toward replacing conventional wire harnesses with flexible flat cables (FFCs) in cell contact systems (CCS), owing to their thin and narrow form factor enabling space-efficient, light battery pack design, and cost savings. This study investigates the process sensitivity of 532 nm continuous-wave laser micro-dissimilar welding between an ultra-thin copper FFC and an uncoated Al1050 busbar for EV battery management systems (BMS). Six welding conditions were established at a fixed linear energy density (LED = 2 J/mm) by varying laser power and scan speed from 500 W to 250 mm/s to 1000 W and 500 mm/s. Despite identical LED, weld quality varied markedly with the power–speed combination. At higher power conditions (≥ 700 W), extensive cracks, pores, and Al–Cu intermetallic compound (IMC) layers raised electrical resistance up to 1205 µΩ. The low-power condition (600 W and 300 mm/s) produced the thinnest IMC layer (~ 10 μm), the largest grain size, and the lowest electrical resistance (78 µΩ). Although defect-free three welding conditions passed the peel test, electrical resistance varied from 78 to 145 µΩ, inducing a non-negligible voltage offset at the BMS cell-sensing point. From these results, multi-criteria evaluations such as integrating mechanical integrity, electrical resistance, and microstructural analysis are needed for reliable laser micro-welding of ultra-thin dissimilar FFC-to-busbar joints.
| Original language | English |
|---|---|
| Journal | International Journal of Precision Engineering and Manufacturing |
| DOIs | |
| State | Accepted/In press - 2026 |
UN SDGs
This output contributes to the following UN Sustainable Development Goals (SDGs)
-
SDG 7 Affordable and Clean Energy
Keywords
- Cell contact system
- Flexible flat cable
- Laser micro-dissimilar welding
- Multi-criteria reliability qualification
- Process sensitivity
Fingerprint
Dive into the research topics of 'Multi-Criteria Reliability Qualification on Laser Micro-Dissimilar Welding of Ultra-Thin Flexible Flat Cu Cable onto Uncoated Aluminum alloy Busbar for EV Cell Sensing'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver