Noise generation system using DCT

Ki Cheol Tae; Jin Gyun Chung; Dae Ik Kim

doi:10.1109/ISCAS.2001.922161

Noise generation system using DCT

Ki Cheol Tae
, Jin Gyun Chung
, Dae Ik Kim

Division of Electronic Engineering

Research output: Contribution to conference › Conference paper › peer-review

5 Scopus citations

Abstract

The performance of communication systems should be tested against a set of requirements. This procedure requires various noise sources to be connected onto the line to inject the specified noise signals into the receiver of the communication system. In this paper, a flexible noise generation algorithm using DCT is proposed. It is shown that the proposed method outperforms conventional methods when a noise model requires complicated PSD specifications.

Original language	English
Title of host publication	ISCAS 2001 - 2001 IEEE International Symposium on Circuits and Systems, Conference Proceedings
Pages	29-32
Number of pages	4
DOIs	https://doi.org/10.1109/ISCAS.2001.922161
State	Published - 2001
Event	2001 IEEE International Symposium on Circuits and Systems, ISCAS 2001 - Sydney, NSW, Australia Duration: 2001.05.6 → 2001.05.9

Publication series

Name	ISCAS 2001 - 2001 IEEE International Symposium on Circuits and Systems, Conference Proceedings
Volume	4

Conference

Conference	2001 IEEE International Symposium on Circuits and Systems, ISCAS 2001
Country/Territory	Australia
City	Sydney, NSW
Period	01.05.6 → 01.05.9

Quacquarelli Symonds(QS) Subject Topics

Computer Science & Information Systems
Engineering - Electrical & Electronic
Engineering - Petroleum

Access to Document

10.1109/ISCAS.2001.922161

Cite this

@inproceedings{6c2bf3acc15445ac8070b151334393f2,

title = "Noise generation system using DCT",

abstract = "The performance of communication systems should be tested against a set of requirements. This procedure requires various noise sources to be connected onto the line to inject the specified noise signals into the receiver of the communication system. In this paper, a flexible noise generation algorithm using DCT is proposed. It is shown that the proposed method outperforms conventional methods when a noise model requires complicated PSD specifications.",

author = "Tae, \{Ki Cheol\} and Chung, \{Jin Gyun\} and Kim, \{Dae Ik\}",

year = "2001",

doi = "10.1109/ISCAS.2001.922161",

language = "English",

isbn = "0780366859",

series = "ISCAS 2001 - 2001 IEEE International Symposium on Circuits and Systems, Conference Proceedings",

pages = "29--32",

booktitle = "ISCAS 2001 - 2001 IEEE International Symposium on Circuits and Systems, Conference Proceedings",

note = "2001 IEEE International Symposium on Circuits and Systems, ISCAS 2001 ; Conference date: 06-05-2001 Through 09-05-2001",

}

Tae, KC, Chung, JG & Kim, DI 2001, Noise generation system using DCT. in ISCAS 2001 - 2001 IEEE International Symposium on Circuits and Systems, Conference Proceedings., 922161, ISCAS 2001 - 2001 IEEE International Symposium on Circuits and Systems, Conference Proceedings, vol. 4, pp. 29-32, 2001 IEEE International Symposium on Circuits and Systems, ISCAS 2001, Sydney, NSW, Australia, 01.05.6. https://doi.org/10.1109/ISCAS.2001.922161

Noise generation system using DCT. / Tae, Ki Cheol; Chung, Jin Gyun; Kim, Dae Ik.
ISCAS 2001 - 2001 IEEE International Symposium on Circuits and Systems, Conference Proceedings. 2001. p. 29-32 922161 (ISCAS 2001 - 2001 IEEE International Symposium on Circuits and Systems, Conference Proceedings; Vol. 4).

Research output: Contribution to conference › Conference paper › peer-review

TY - GEN

T1 - Noise generation system using DCT

AU - Tae, Ki Cheol

AU - Chung, Jin Gyun

AU - Kim, Dae Ik

PY - 2001

Y1 - 2001

N2 - The performance of communication systems should be tested against a set of requirements. This procedure requires various noise sources to be connected onto the line to inject the specified noise signals into the receiver of the communication system. In this paper, a flexible noise generation algorithm using DCT is proposed. It is shown that the proposed method outperforms conventional methods when a noise model requires complicated PSD specifications.

AB - The performance of communication systems should be tested against a set of requirements. This procedure requires various noise sources to be connected onto the line to inject the specified noise signals into the receiver of the communication system. In this paper, a flexible noise generation algorithm using DCT is proposed. It is shown that the proposed method outperforms conventional methods when a noise model requires complicated PSD specifications.

UR - https://www.scopus.com/pages/publications/84888061702

U2 - 10.1109/ISCAS.2001.922161

DO - 10.1109/ISCAS.2001.922161

M3 - Conference paper

AN - SCOPUS:84888061702

SN - 0780366859

SN - 9780780366855

T3 - ISCAS 2001 - 2001 IEEE International Symposium on Circuits and Systems, Conference Proceedings

SP - 29

EP - 32

BT - ISCAS 2001 - 2001 IEEE International Symposium on Circuits and Systems, Conference Proceedings

T2 - 2001 IEEE International Symposium on Circuits and Systems, ISCAS 2001

Y2 - 6 May 2001 through 9 May 2001

ER -

Noise generation system using DCT

Abstract

Publication series

Conference

Quacquarelli Symonds(QS) Subject Topics

Access to Document

Other files and links

Fingerprint

Cite this