Skip to main navigation Skip to search Skip to main content

Performance of CZTSSe thin film solar cells fabricated using a sulfo-selenization process: Influence of the Cu composition

  • R. B.V. Chalapathy
  • , Myeng Gil Gang
  • , Chang Woo Hong
  • , Ji Hun Kim
  • , Jun Sun Jang
  • , Jae Ho Yun
  • , Jin Hyeok Kim*
  • *Corresponding author for this work
  • Chonnam National University
  • Gwangju Institute of Science and Technology
  • Korea Institute of Energy Research

Research output: Contribution to journal › Journal article › peer-review

Abstract

In this work, earth-abundant CZTSSe thin film solar cells were fabricated by sulfo-selenization of the Mo/Zn/Cu/Sn/Cu metallic precursors. The influences of morphological and compositional properties of the absorbers on performance of solar cells were investigated by tuning Cu content in the films. The Raman analysis showed that absorbers consist of a kesterite CZTSSe phase with ZnSe as a minor secondary phase. X-ray photoelectron spectroscopy (XPS) analyses revealed that the surfaces are Cu depleted and Zn enriched compared with the bulk composition of the absorbers. The results indicate that during sulfo-selenization the Cu diffused into the film and the Zn towards the film surface. The performance of the solar cells initially improved with the increasing of the Cu content and then decreased. By tuning the Cu content in the absorbers, the minority-carrier life time improved from 0.8 to 1.6 ns. The power conversion efficiency increased from 5.1 to 8.03% with fine controlling of Cu composition of the CZTSSe absorbers. The diode-ideality factors are higher than 2, suggesting an increased interfacial recombination in the devices. The high ideality-factors A and low minority carrier life times may originate from surface and bulk related defects, which in turn limits the Voc and the achievable high conversion efficiency for the CZTSSe thin film solar cells.

Original languageEnglish
Pages (from-to)260-269
Number of pages10
JournalSolar Energy
Volume159
DOIs
StatePublished - 2018.01.1
Externally publishedYes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • Cu content
  • CZTSSe
  • Sputtering
  • Sulfo-selenization
  • Thin film solar cells

Fingerprint

Dive into the research topics of 'Performance of CZTSSe thin film solar cells fabricated using a sulfo-selenization process: Influence of the Cu composition'. Together they form a unique fingerprint.

Cite this