Photo‐Charging of Li(Ni0.65Co0.15Mn0.20)O2 Lithium‐Ion Battery Using Silicon Solar Cells

This study reports an integrated device in which a lithium‐ion battery (LIB) and Si solar cells are interconnected. The LIB is fabricated using the Li(Ni0.65Co0.15Mn0.20)O2 (NCM622) cathode and the Li4Ti5O12 (LTO) anode. The surface and shape morphologies of the NCM and LTO powders were investigated by field emission scanning electron microscopy (FE‐SEM). In addition, the structural properties were thoroughly examined by X‐ray diffraction (XRD). Further, their electrochemical characterization was carried out on a potentiostat. The specific discharge capacity of the NCM cathode (half‐cell) was 188.09 mAh/g at 0.1 C current density. In further experiments, the NCM‐LTO full‐cell has also shown an excellent specific capacity of 160 mAh/g at a high current density of 1 C. Additionally, the capacity retention was outstanding, with 99.63% at 1 C after 50 cycles. Moreover, to meet the charging voltage requirements of the NCM‐LTO full‐cell, six Si solar cells were con-nected in series. The open‐circuit voltage (VOC) and the short‐circuit photocurrent density (JSC) for the Si solar cells were 3.37 V and 5.42 mA/cm². The calculated fill factor (FF) and efficiency for the Si solar cells were 0.796 and 14.54%, respectively. Lastly, the integrated device has delivered a very high‐power conversion‐storage efficiency of 7.95%.