Properties and rapid consolidation of binderless nanostuctured Ti (C, N) by pulsed current activated sintering

In Jin Shon; Kwon Il Na; Hyun Kuk Park; Sung Wook Cho; Jae Won Lim; Wonbaek Kim

Properties and rapid consolidation of binderless nanostuctured Ti (C, N) by pulsed current activated sintering

In Jin Shon^*
, Kwon Il Na
, Hyun Kuk Park
, Sung Wook Cho
, Jae Won Lim
, Wonbaek Kim

^*Corresponding author for this work

Jeonbuk National University
Korea Institute of Geoscience, Mining and Materials Resources

Research output: Contribution to journal › Journal article › peer-review

3 Scopus citations

Abstract

The grain size of Ti (C, N) decreases with an increase in ball milling time. Ti (C, N) nanopowder was fabricated by high energy ball milling for 10 h. The rapid sintering of nanostuctured Ti (C, N) hard materials was investigated with pulsed current activated sintering via a heating sintering process. The advantage of this process is that it allows very quick densification to near theoretical density and prohibition of grain growth in nanostuctured materials. A dense nanostructured Ti (C, N) hard material with a relative density of up to 98% was produced with simultaneous application of 80 MPa pressure and a pulsed current of 2700 A within 3 minutes. The effect of ball milling time on the sintering behavior, grain size and mechanical properties of binderless Ti (C, N) was investigated.

Original language	English
Pages (from-to)	441-445
Number of pages	5
Journal	Journal of Ceramic Processing Research
Volume	13
Issue number	4
State	Published - 2012

Keywords

Mechanical properties
Milling
Nanomaterials
Rapid sintering

Quacquarelli Symonds(QS) Subject Topics

Materials Science

Cite this

@article{f9f7353506ea4c3e8de6ed2771e6d23e,

title = "Properties and rapid consolidation of binderless nanostuctured Ti (C, N) by pulsed current activated sintering",

abstract = "The grain size of Ti (C, N) decreases with an increase in ball milling time. Ti (C, N) nanopowder was fabricated by high energy ball milling for 10 h. The rapid sintering of nanostuctured Ti (C, N) hard materials was investigated with pulsed current activated sintering via a heating sintering process. The advantage of this process is that it allows very quick densification to near theoretical density and prohibition of grain growth in nanostuctured materials. A dense nanostructured Ti (C, N) hard material with a relative density of up to 98\% was produced with simultaneous application of 80 MPa pressure and a pulsed current of 2700 A within 3 minutes. The effect of ball milling time on the sintering behavior, grain size and mechanical properties of binderless Ti (C, N) was investigated.",

keywords = "Mechanical properties, Milling, Nanomaterials, Rapid sintering",

author = "Shon, \{In Jin\} and Na, \{Kwon Il\} and Park, \{Hyun Kuk\} and Cho, \{Sung Wook\} and Lim, \{Jae Won\} and Wonbaek Kim",

year = "2012",

language = "English",

volume = "13",

pages = "441--445",

journal = "Journal of Ceramic Processing Research",

issn = "1229-9162",

number = "4",

}

TY - JOUR

T1 - Properties and rapid consolidation of binderless nanostuctured Ti (C, N) by pulsed current activated sintering

AU - Shon, In Jin

AU - Na, Kwon Il

AU - Park, Hyun Kuk

AU - Cho, Sung Wook

AU - Lim, Jae Won

AU - Kim, Wonbaek

PY - 2012

Y1 - 2012

N2 - The grain size of Ti (C, N) decreases with an increase in ball milling time. Ti (C, N) nanopowder was fabricated by high energy ball milling for 10 h. The rapid sintering of nanostuctured Ti (C, N) hard materials was investigated with pulsed current activated sintering via a heating sintering process. The advantage of this process is that it allows very quick densification to near theoretical density and prohibition of grain growth in nanostuctured materials. A dense nanostructured Ti (C, N) hard material with a relative density of up to 98% was produced with simultaneous application of 80 MPa pressure and a pulsed current of 2700 A within 3 minutes. The effect of ball milling time on the sintering behavior, grain size and mechanical properties of binderless Ti (C, N) was investigated.

AB - The grain size of Ti (C, N) decreases with an increase in ball milling time. Ti (C, N) nanopowder was fabricated by high energy ball milling for 10 h. The rapid sintering of nanostuctured Ti (C, N) hard materials was investigated with pulsed current activated sintering via a heating sintering process. The advantage of this process is that it allows very quick densification to near theoretical density and prohibition of grain growth in nanostuctured materials. A dense nanostructured Ti (C, N) hard material with a relative density of up to 98% was produced with simultaneous application of 80 MPa pressure and a pulsed current of 2700 A within 3 minutes. The effect of ball milling time on the sintering behavior, grain size and mechanical properties of binderless Ti (C, N) was investigated.

KW - Mechanical properties

KW - Milling

KW - Nanomaterials

KW - Rapid sintering

UR - https://www.scopus.com/pages/publications/84866030018

M3 - Journal article

AN - SCOPUS:84866030018

SN - 1229-9162

VL - 13

SP - 441

EP - 445

JO - Journal of Ceramic Processing Research

JF - Journal of Ceramic Processing Research

IS - 4

ER -

Properties and rapid consolidation of binderless nanostuctured Ti (C, N) by pulsed current activated sintering

Abstract

Keywords

Quacquarelli Symonds(QS) Subject Topics

Other files and links

Fingerprint

Cite this