Skip to main navigation Skip to search Skip to main content

Surface modification of Corynebacterium glutamicum for enhanced Reactive Red 4 biosorption

  • Juan Mao
  • , Sung Wook Won
  • , K. Vijayaraghavan
  • , Yeoung Sang Yun*
  • *Corresponding author for this work
  • Jeonbuk National University

Research output: Contribution to journalJournal articlepeer-review

Abstract

This study reports the possibility of enhancing the reactive dye biosorption capacity of Corynebacterium glutamicum via its cross-linking with polyethylenimine (PEI). The amine groups in the cell wall of C. glutamicum were found to electrostatically interact with reactive dye anions. Thus, cross-linking the biomass with PEI enhanced the primary and secondary amine groups, thereby increased the biosorption of reactive dye. The pH edge experiments revealed that acidic conditions, due to protonation of the amine groups, were found to favor Reactive Red 4 (RR 4) biosorption. According to the Langmuir model, the PEI-modified C. glutamicum recorded a maximum RR 4 uptake capacity of 485.1 mg/g compared to 171.9 mg/g of the raw C. glutamicum. The kinetic experiments revealed that chemical modification decreased the rate of biosorption. Desorption was successful at pH 9, with the biomass successfully regenerated and reused over four cycles.

Original languageEnglish
Pages (from-to)1463-1466
Number of pages4
JournalBioresource Technology
Volume100
Issue number3
DOIs
StatePublished - 2009.02

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 6 - Clean Water and Sanitation
    SDG 6 Clean Water and Sanitation

Keywords

  • Biosorption
  • Desorption
  • Isotherm
  • Reactive dye
  • Wastewater treatment

Quacquarelli Symonds(QS) Subject Topics

  • Environmental Sciences
  • Engineering - Electrical & Electronic
  • Engineering - Chemical

Fingerprint

Dive into the research topics of 'Surface modification of Corynebacterium glutamicum for enhanced Reactive Red 4 biosorption'. Together they form a unique fingerprint.

Cite this