Torque error compensation of SPMSM drives with a stator flux linkage observer including low speed operation

Jae Suk Lee; Chang Seok Park; Seunghun Baek; Tae Uk Jung

doi:10.1109/AMC.2019.8371102

Torque error compensation of SPMSM drives with a stator flux linkage observer including low speed operation

Jae Suk Lee
, Chang Seok Park
, Seunghun Baek
, Tae Uk Jung

Department of Electrical Engineering

Kyungnam University

Research output: Contribution to conference › Conference paper › peer-review

3 Scopus citations

Abstract

A compensation algorithm targeting for torque development from a surface mounted permanent magnet synchronous machine (SPMSM) including a low speed operation is presented in this paper. As known, PM flux linkage in SPMSM is varied by temperature. Because a Maximum Torque Per Ampere (MTPA) look up table (LUT), a control algorithm used for minimizing copper losses, is generated using calculated permanent magnet flux linkage, change of permanent magnet flux linkage yields torque error of a SPMSM drive. In the manuscript, estimated permanent magnet flux linkage is obtained using a stator flux observer. The torque error is corrected using the estimated permanent magnet flux linkage.

Original language	English
Title of host publication	Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	277-280
Number of pages	4
ISBN (Electronic)	9781538619469
DOIs	https://doi.org/10.1109/AMC.2019.8371102
State	Published - 2018.06.1
Event	15th IEEE International Workshop on Advanced Motion Control, AMC 2018 - Tokyo, Japan Duration: 2018.03.9 → 2018.03.11

Publication series

Name	Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018

Conference

Conference	15th IEEE International Workshop on Advanced Motion Control, AMC 2018
Country/Territory	Japan
City	Tokyo
Period	18.03.9 → 18.03.11

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Flux observer
SPMSM drives
Torque error compensation

Quacquarelli Symonds(QS) Subject Topics

Engineering - Mechanical
Computer Science & Information Systems
Mathematics
Data Science

Access to Document

10.1109/AMC.2019.8371102

Cite this

Lee, J. S., Park, C. S., Baek, S., & Jung, T. U. (2018). Torque error compensation of SPMSM drives with a stator flux linkage observer including low speed operation. In Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018 (pp. 277-280). (Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/AMC.2019.8371102

Lee, Jae Suk ; Park, Chang Seok ; Baek, Seunghun et al. / Torque error compensation of SPMSM drives with a stator flux linkage observer including low speed operation. Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018. Institute of Electrical and Electronics Engineers Inc., 2018. pp. 277-280 (Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018).

@inproceedings{eddf811f177e4224bf361460d5ed6394,

title = "Torque error compensation of SPMSM drives with a stator flux linkage observer including low speed operation",

abstract = "A compensation algorithm targeting for torque development from a surface mounted permanent magnet synchronous machine (SPMSM) including a low speed operation is presented in this paper. As known, PM flux linkage in SPMSM is varied by temperature. Because a Maximum Torque Per Ampere (MTPA) look up table (LUT), a control algorithm used for minimizing copper losses, is generated using calculated permanent magnet flux linkage, change of permanent magnet flux linkage yields torque error of a SPMSM drive. In the manuscript, estimated permanent magnet flux linkage is obtained using a stator flux observer. The torque error is corrected using the estimated permanent magnet flux linkage.",

keywords = "Flux observer, SPMSM drives, Torque error compensation",

author = "Lee, \{Jae Suk\} and Park, \{Chang Seok\} and Seunghun Baek and Jung, \{Tae Uk\}",

note = "Publisher Copyright: {\textcopyright} 2018 IEEE.; 15th IEEE International Workshop on Advanced Motion Control, AMC 2018 ; Conference date: 09-03-2018 Through 11-03-2018",

year = "2018",

month = jun,

day = "1",

doi = "10.1109/AMC.2019.8371102",

language = "English",

series = "Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "277--280",

booktitle = "Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018",

}

Lee, JS, Park, CS, Baek, S & Jung, TU 2018, Torque error compensation of SPMSM drives with a stator flux linkage observer including low speed operation. in Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018. Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018, Institute of Electrical and Electronics Engineers Inc., pp. 277-280, 15th IEEE International Workshop on Advanced Motion Control, AMC 2018, Tokyo, Japan, 18.03.9. https://doi.org/10.1109/AMC.2019.8371102

Torque error compensation of SPMSM drives with a stator flux linkage observer including low speed operation. / Lee, Jae Suk; Park, Chang Seok; Baek, Seunghun et al.
Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018. Institute of Electrical and Electronics Engineers Inc., 2018. p. 277-280 (Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018).

Research output: Contribution to conference › Conference paper › peer-review

TY - GEN

T1 - Torque error compensation of SPMSM drives with a stator flux linkage observer including low speed operation

AU - Lee, Jae Suk

AU - Park, Chang Seok

AU - Baek, Seunghun

AU - Jung, Tae Uk

PY - 2018/6/1

Y1 - 2018/6/1

N2 - A compensation algorithm targeting for torque development from a surface mounted permanent magnet synchronous machine (SPMSM) including a low speed operation is presented in this paper. As known, PM flux linkage in SPMSM is varied by temperature. Because a Maximum Torque Per Ampere (MTPA) look up table (LUT), a control algorithm used for minimizing copper losses, is generated using calculated permanent magnet flux linkage, change of permanent magnet flux linkage yields torque error of a SPMSM drive. In the manuscript, estimated permanent magnet flux linkage is obtained using a stator flux observer. The torque error is corrected using the estimated permanent magnet flux linkage.

AB - A compensation algorithm targeting for torque development from a surface mounted permanent magnet synchronous machine (SPMSM) including a low speed operation is presented in this paper. As known, PM flux linkage in SPMSM is varied by temperature. Because a Maximum Torque Per Ampere (MTPA) look up table (LUT), a control algorithm used for minimizing copper losses, is generated using calculated permanent magnet flux linkage, change of permanent magnet flux linkage yields torque error of a SPMSM drive. In the manuscript, estimated permanent magnet flux linkage is obtained using a stator flux observer. The torque error is corrected using the estimated permanent magnet flux linkage.

KW - Flux observer

KW - SPMSM drives

KW - Torque error compensation

UR - https://www.scopus.com/pages/publications/85048757698

U2 - 10.1109/AMC.2019.8371102

DO - 10.1109/AMC.2019.8371102

M3 - Conference paper

AN - SCOPUS:85048757698

T3 - Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018

SP - 277

EP - 280

BT - Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 15th IEEE International Workshop on Advanced Motion Control, AMC 2018

Y2 - 9 March 2018 through 11 March 2018

ER -

Lee JS, Park CS, Baek S, Jung TU. Torque error compensation of SPMSM drives with a stator flux linkage observer including low speed operation. In Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018. Institute of Electrical and Electronics Engineers Inc. 2018. p. 277-280. (Proceedings - 2018 IEEE 15th International Workshop on Advanced Motion Control, AMC 2018). doi: 10.1109/AMC.2019.8371102

Torque error compensation of SPMSM drives with a stator flux linkage observer including low speed operation

Abstract

Publication series

Conference

UN SDGs

Keywords

Quacquarelli Symonds(QS) Subject Topics

Access to Document

Other files and links

Fingerprint

Cite this